Test for continue...
Induction Cooker Electronic Card Test System
In the test system we produced for FEREL ELEKTRONİK, we test induction cooker cards at the semi-finished stage. With this testing system, analog values of the product and functions within the stove are tested. A loadbox for the product was created to ensure that the test was carried out under 100% identical conditions. The resulting test results are recorded in the PC environment, providing reporting on product performance and field evaluation.
Resimleri büyütmek için üzerine tıklayınız.
Lower Water Tank Leak-Tightness Test System
Two-stage testing was carried out in the test system we produced for ARÇELİK DRYER BUSINESS. First, physical measurements of the product and the presence/absence of o-ring on the product were tested. In the second stage, the lower water tank installation areas were tested with the pressure reduction method. With this test system, 100% control of the product was carried out and the test results were transferred to the product with a barcode printer.
Resimleri büyütmek için üzerine tıklayınız.
Manual Programming Test Fixture
In our system we produced for BEKO THAI business, simultaneous programming of refrigerator electronic cards is provided. Manual printing was used in this system. Programming was done with ATMEL AVRISP mkII product.
Resimleri büyütmek için üzerine tıklayınız.
Battery Box Test System
With the test system we produced for MUTLU AKÜ, battery boxes produced by injection were tested before the final product stage, and errors that may occur due to injection were detected and high quality production was ensured. This testing was done with the 30kV Hi Pot test device developed by IBER TEKNO. In this 3-axis controlled system, the box bases have been tested 100%. In addition, injection production amount, system current status, etc. The information is collected in the system and the user is informed with the specially designed interface software. For system video
Resimleri büyütmek için üzerine tıklayınız.